How To Manually Move A Power Seat Mustang

How To Manually Move A Power Seat Mustang, <h1>How to Manually Move a Power Seat in a Mustang</h1> <p>Power seats in a Mustang provide, Blog, how-to-manually-move-a-power-seat-mustang, KampionLite

How to Manually Move a Power Seat in a Mustang

Power seats in a Mustang provide convenience and comfort to drivers by allowing them to adjust the position of their seat electronically. However, there may be times when the power seat fails to operate due to various reasons. In such situations, knowing how to manually move a power seat can be extremely useful. In this article, we will provide a step-by-step guide on how to manually move a power seat in a Mustang.


Before attempting to manually move the power seat, it is important to take certain precautions to ensure your safety:

  1. Engage the parking brake to prevent the car from moving unexpectedly.
  2. Ensure that the ignition is turned off to avoid any accidental activation of the power seat.
  3. Disconnect the car battery to avoid any electrical shocks or damage to the seat control module.

Removing the Power Seat

If you are unable to move the power seat using the electronic controls, you may need to remove the seat completely to access the manual adjustment mechanisms. Here’s how you can do it:

Step 1: Locate the Seat Mounting Bolts

Locate the mounting bolts that secure the power seat to the floor. Typically, there are four bolts, one on each corner of the seat.

Step 2: Remove the Seat Mounting Bolts

Using an appropriate wrench or socket, carefully remove the bolts securing the seat to the floor. Keep in mind that some bolts may be hidden beneath protective covers.

Step 3: Disconnect the Seat Wiring Harness

Once the bolts are removed, carefully disconnect the seat wiring harness that connects the power seat to the car’s electrical system. This will ensure that the seat is completely detached and can be lifted out of the car.

Step 4: Lift Out the Seat

With the bolts and wiring harness disconnected, carefully lift the power seat out of the car. It is recommended to have another person assist you in lifting the seat to avoid any injuries or strain.

Manually Adjusting the Seat Position

Now that the power seat is removed, you can proceed to manually adjust its position. Follow these steps:

Step 1: Locate the Manual Seat Adjustments

Look for the manual seat adjustment mechanisms on the underside of the seat. These mechanisms are typically accessible once the seat is removed from the car.

Step 2: Identify the Adjustment Controls

Identify the specific controls that correspond to the seat adjustment you wish to make. There are usually separate controls for adjusting the seat height, forward/backward movement, and seatback angle.

Step 3: Operate the Manual Controls

Using the appropriate tools or levers, operate the manual controls to adjust the seat position according to your preference. Refer to the owner’s manual or vehicle documentation for specific instructions on how to use the manual adjustments.

Step 4: Test the Seat Position

Once you have manually adjusted the seat position, test it to ensure that it is adjusted correctly and securely. Sit in the seat and adjust it further if necessary.

Reinstalling the Power Seat

After manually adjusting the seat, you may want to reinstall the power seat for convenience. Here are the steps to follow:

Step 1: Lower the Seat into Position

Carefully lower the power seat into the desired position in the car.

Step 2: Reconnect the Seat Wiring Harness

Reconnect the seat wiring harness to restore the electrical connection between the power seat and the car’s electrical system.

Step 3: Align the Mounting Bolt Holes

Align the mounting bolt holes on the power seat with the corresponding holes on the floor.

Step 4: Insert and Tighten the Mounting Bolts

Using the wrench or socket, insert and tighten the mounting bolts to secure the power seat to the floor. Ensure that the bolts are properly tightened to ensure a secure fit.

Step 5: Test the Power Seat

With the power seat reinstalled, test its functionality by using the electronic controls. Ensure that the seat moves smoothly and accurately in response to the controls.

By following these instructions, you should be able to manually move a power seat in a Mustang. Remember to exercise caution and take all necessary safety precautions throughout the process. If you encounter any difficulties or the power seat fails to function even after manual adjustment, it is recommended to consult a professional mechanic or contact the manufacturer for further assistance.



Leave a Comment